26 May 2024 to 1 June 2024
La Biodola - Isola d'Elba (Italy)
Europe/Rome timezone

Timing performance of FBK SiPM NUV-HD-MT technology

27 May 2024, 09:41
3h 9m
Sala Elena

Sala Elena

Poster T2 - Photo Detectors and Particle ID Photo Detectors and Particle ID - Poster session

Speaker

Michele Penna (Politecnico Torino / FBK / INFN)

Description

The improvement of the timing performance is one of the main focus for several fields from high energy physics to biomedical applications such as Time of Flight Positron Emission Tomography (ToF-PET). In the last years, excellent results in terms of Single Photon Time Resolution (SPTR) and Coincidence Time Resolution (CTR) have been achieved thanks to the improvement of the scintillator crystal materials, the electronics readout and the detector development. In this study we will present SPTR and CTR measurements of the recently introduced FBK NUV-HD Metal in Trench (MT) SiPM technology. Thanks to the addition of the optically insulating material inside the trenches, FBK NUV-HD-MT devices show an extremely low CrossTalk (CT) of about $\simeq5\%$ at $47.5V$ ($\simeq15V$ excess bias). The Photon Detection Efficiency (PDE) reaches the $\simeq65\%$ at the same excess bias at $420nm$.
By using a femto-second laser with a wavelength of $390nm$, we have measured the SPTR for SPADs with different microcell sizes and different versions with a metal mask outside the active area (capacitive coupling). Moreover, a $1mm\times1mm$ and a $3mm\times3mm$ SiPM with $40\mu m$ cell size and M0 masking version have been tested. The CTR has been measured using a $4mm\times4mm$ SiPM to match the $3mm\times3mm\times5mm$ LYSO:Ce:Ca crystal. By using a high frequency readout electronics, we achieved a CTR of about $\simeq 80 ps$ FWHM and an outstanding SPTR of about $\simeq 19ps$ and $\simeq 30ps$ FWHM for the SPAD and $1mm\times1mm$ SiPM with $40\mu m$ M0 masking respectively.
This work opens the door to further investigations in order to study the worsening of the SPTR as the SPAD size increases but also to understand the role of the metal masking in the timing performance and to discuss about limitations and further improvements.

Role of Submitter I am the presenter

Primary authors

Alberto Giacomo Gola (Fondazione Bruno Kessler) Andrea Ficorella (Fondazione Bruno Kessler) Elena Moretti (Fondazione Bruno Kessler) Jacopo Dalmasson Maria Ruzzarin (FBK) Michele Penna (Politecnico Torino / FBK / INFN) Michele Penna (Politecnico di Torino and INFN) Nicola Zorzi (Istituto Nazionale di Fisica Nucleare) Oscar Marti Villareal (Fondazione Bruno Kessler) Stefano Merzi (Fondazione Bruno Kessler) fabio acerbi (FBK)

Presentation materials